4.10 Adjusting The Height On The Multiline Terminal; Figure 5-66 Adjust Height Of Dt Series Terminal - NEC Univerge SV9100 System Hardware Manual

Issue 2.0

4.10 Adjusting the Height on the Multiline Terminal

SV9100 System Hardware Manual
The height of the DT series multiline terminals can be adjusted by moving the legs
attached to the bottom of the terminal.
1. Turn telephone over (button side down).
2. Adjust legs to desired height (refer to
Terminal).

Figure 5-66 Adjust Height of DT Series Terminal

3. Turn telephone over (button side up).
Figure 5-66 Adjust Height of DT Series
5-71