Issue 2.0
Figure 7-9 Wall Mounting the PGDAD
SV9100 System Hardware Manual
13.
Optional:
To wall mount the PGDAD, insert two wood screws 100mm apart (3 15/16").
Leave 3mm (1/8") of the screw exposed. The screws can be installed either
vertical or horizontal, depending on which position fits best for your location.
Figure 7-8 Installing the Screws
14.
The back of the PGDAD has two key-hole type openings. Place the PGDAD
over the two screws and slide it down or over (depending on the positioning)
to lock it in place.
7-9