Figure 3-41 Chs2Ug B Expansion Bay - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
SV9100 System Hardware Manual
Figure 3-37 CHS2UG B Expansion Bay
4.
5.
6.
7.
Pull the cover toward you to remove.
Cover must be removed prior to installation
of GPZ-BS10 blade.
IMPORTANT
Remove knockout in center of cover.
Align the GPZ-BS10 blade with the guides located in the
expansion bay.
Slide the GPZ-BS10 blade into the chassis until resistance
(back plane) is felt (refer to
GPZ-BS10 on page 3-32).
Figure 3-38 Installing the
3-31