Restoring The Data Protection Status; Shutdown The System; Replace The Hdd; Restore The Data Protection Status - Epson RC620 CU Manual

15.3 Restoring the Data Protection Status

Follow the instruction below and restore the data protection status.

15.4.1 Shutdown the system

15.4.2 Replace the HDD

15.4.3 Restore the data protection status

15.3.1 Shutdown the system
(1) Check the port which is normally running.
To check the port which is normally running, execute the Intel Matrix Storage Console
NOTE

from Start | All programs | Intel(R) Matrix Storage Manager.
(2) Shutdown the system.
15.3.2 Replace the HDD
Refer to Maintenance 6.9 HDD and replace the HDD.
15.3.3 Restore the data protection status
(1) Start up the Controller.
(2) Execute the Intel Matrix Storage Console from Start | All programs | Intel(R) Matrix
Storage Manager.
(3) Click the <Restore RAID 1 data protection>.
RC620 Rev.8
Setup & Operation 15. RAID
119