Hdd Recovery Procedure (S/N 01/02-01001 Or Later); Backing Up Epson Rc+ Data - Epson RC620 CU Manual

(6) When the restoration is completed, the message below appears.
7.2 HDD Recovery Procedure
1
2
3
4
5
To recovery the HDD, prepare the following.
RC620 Recovery Disk
PS/2 keyboard
PS/2 mouse
USB DVD-ROM drive
 NOTE - When recovering Windows, USB keyboard and USB mouse are not available. Make
sure to use PS/2 keyboard and PS/2 mouse.
- The recovery data is built in the RC620 controller HDD.
However, depending on the HDD status, the recovery work does not work. When you
cannot recover, replace the HDD.

7.2.1 Backing up EPSON RC+ data

(1) Exit EPSON RC+ if it is running.
(2) Copy the all files in the following folders in HDD to a USB memory or other memory
RC620 Rev.8
Drive restore was successful. Please reboot your system.
Press any key to continue . . .
Press any key on the keyboard to reboot the RC620 controller.
Recovery Step
Back up the current data
Back up the current EPSON
RC+ data
Windows recovery
Restore the EPSPN RC+ data
Restore the backup data
Item
medium.
C:¥EpsonRC60¥Backup
C:¥EpsonRC60¥Calib
C:¥EpsonRC60¥Config
C:¥EpsonRC60¥Projects
C:¥EpsonRC60¥Status
Maintenance 7. Recovering the HDD
(S/N 01/02-01001 or later)
Reference
Maintenance 4.3 Backup
7.1.1 Backing up EPSON RC+
Maintenance
data
Maintenance 7.1.2 Recovering Windows
Maintenance 7.1.3 Restoring EPSON RC+ data
Maintenance 4.4 Restore
Attached to the controller.
When using USB keyboard.
When using USB mouse.
When DVD drive is not installed.
Note
203