Setup From Control Device - Epson RC620 CU Manual

4.4.3 Setup from Control Device

Set the control device from EPSON RC+ 6.0.
(1) Select EPSON RC+ 6.0 menu | Setup | System Configuration to display the [System
(1) Select SPEL Controller Board | Configuration.
(2) Select Setup Controller | Control Device to select the control device from the
(3) Click the <Apply> button.
(4) Click the <Close> button.
RC620 Rev.8
Setup & Operation 4. Operation Mode (TEACH/AUTO)
Configuration] dialog.
(2)
following two types.
Self Remote (I/O)
(5)
(4)
(3)
35