Maintenance 6. Maintenance Parts Replacement Procedures
6.6.3 Switching Power Supply (ATX)
Switching
(1) Turn OFF the Controller and unplug the power connector.
Power Supply
(ATX)
(2) Remove 10 screws and the top panel.
Removal
(3) If COM panel is mounted:
(4) Remove 6 screws and the back panel.
(5) Remove the Cable No. (6) connecting with the Switching Power Supply (ATX) and 3
192
Remove 2 screws for the COM
panel.
screws.
Refer to Maintenance: 3.2 Diagram of Cable Connections.
COM panel
RC620 Rev.8