Table of Contents
Advertisement
PCI Board
(1) Insert the PCI Board into the PCI-BPB slot and secure using a screw.
Installation
NOTE
(2) Insert the board holder assembly into
(3) Loosen the screw holding the PCI
NOTE
(4) Place the top panel and secure it using 10 screws.
(5) If you disconnected the external cables from the PCI Board, connect them again.
(6) Plug in the power connector.
RC620 Rev.8
Maintenance 6. Maintenance Parts Replacement Procedures
Be sure to tighten the screw with proper tension. Otherwise, the screw hole will
be broken.
the hole of the side panel (Right) and
secure it using a screw.
Board.
Put the PCI Board in position and set
the screw.
Make sure that the PCI Board is
firmly placed.
Controller starts properly without any vibration or abnormal noise.
Turn ON the Controller and make sure that the
197
Hide quick links:
Advertisement
Table of Contents
