Settings in STARTER
In STARTER, set the communication via Ethernet as follows (in our example, we are using
the Ethernet interface "Belkin F5D 5055"):
1. Call the menu "Tools > Set PG/PC interface ...".
2. Select the "Access point of the application", and therefore the interface parameter
Commissioning Manual
Commissioning Manual, (IH1), 01/2012, 6SL3097-4AF00-0BP2
assignment (in the example we use the access point "S7ONLINE (STEP7)" and the
interface parameterization "TCP/IP(Auto)->Belkin F5D 5055").
Figure 2-4
Selecting the Ethernet interface at the programming device
If the desired interface does not yet exist in the selection list, you can create this.
Commissioning
2.2 STARTER commissioning tool
63