Operation; Transmitting Ecgs By Fax - HP PageWriter XL M1705B Service Manual

Operation
The fax modem allows you to send and receive ECGs using standard
fax machines. The cardiograph must be configured for these
functions before you can use them. (See chapter 2 for information
about configuring your cardiograph for transmitting ECGs.) Fax
transmission also requires A.02.XX revision software.
Transmitting ECGs by
After the cardiograph has been configured to use a site for fax
Fax
transmission, you can fax an ECG to the site. To transmit an ECG:
1. Press 1Menu) until the following display appears.
Transmit Store
Config CheckDisk Files
2. Press Transmit. The following display appears.
Transmit
Selected All NewCroup
Query
Exit
3. Press Selected. The message Reading the disk appears,
followed by this display:
123456 02-13-92 12:09:4lPM
Select Transmit Next Previous More
4. Press Next or Previous until the patient ID number you want
appears, then press Select .
Note .I
u
If you know the patient ID number of the ECG you want to transmit,
you can select the ECG as follows:
w Press More, then Find.
' Type the ID number and press Enter. The most recent ECG with
that ID number
appears.
n
If you want a different ECG for that patient, scroll through the list
by pressing Previous .
n
When the ID number you want appears, press Select .
5. Press Transmit . The following display appears:
Choose site
I 2 3 4 Manual
6. Press the key under the number of the intended receiving
site. This number corresponds to the receiving site previously
M1756A Direct Digital ECG Fax C-3