Files (M1700A & M1701A Only) - HP PageWriter XL M1705B Service Manual

When you press CheckDisk, the message Reading the disk . . .
appears, followed by a second message that shows the percentage of
storage space available on the flexible disk. For example, you may see
a message such as:
Disk 25% full.
Erase Exit
If you want to reformat the disk, press Erase.
Files
This key gives you access to several functions that allow you to
(M1700A & M1701A only)
manipulate the stored ECGs in a variety of ways. When you press
this key, this menu appears:
Delete
Log
Edit Print Analyze
Delete Allows you to delete stored ECGs and SAECGs.
This key brings up the selection display (the selection
display is described at the end of this section). After
you select the patient ID numbers for the ECGs that
you want to delete, press the Delete softkey in
the selection display. The cardiograph displays the
question Start Deleting 1 ECG(s)? (The number
"1" will vary in all messages depending on how
many ECGs were selected.) Press Yes if you want
to continue. The message Deleting 1 of 1 ECG(s)
appears and the ECG is removed from the disk. The
following display appears to confirm that the ECG is
deleted. Press Exit to continue.
Log
1 ECG(s) deleted
Exit
Prints the ECG-Log or Store-Log. The cardiograph
prompts you to select before printing.
The ECG-Log is a list of the last GO Auto and
Manual ECGs recorded on the cardiograph. It shows
the time and date the ECGs were recorded and if
they were stored. The Store-Log lists all Auto ECGs
stored on the flexible disk currently in the disk drive.
It shows if ECGs on the disk were transmitted,
analyzed, or edited.
Operation 3-13