Setting Up The Laserjet Printer - HP PageWriter XL M1705B Service Manual

Setting up the
LaserJet Printer
You must set up the LaserJet printer for serial printing before using
it to print stored ECGs from the cardiograph. To configure the
printer for serial printing, perform the following steps.
1. With the printer on, press the ON LINE key until the light is off.
2. Press the MENU key on the printer to step through the settings
until I/O=PARALLEL* appears.
If I/O=SERIAL* appears, the printer is already set for serial
printing.
3. Press the + key until I/O=SERIAL appears.
4. Press the ENTER key on the printer. An asterisk will apear on
the display: I/O=SERIAL*.
5. Press the MENU key and the BAUDRATE setting will appear.
6. Press the + key until BAUDRATE= appears.
7. Press the ENTER key on the printer. An asterisk will appear on
the display: BAUDRATE=19200*.
S. Press the ON LINE key.
The printer is ready to use with your cardiograph.
Installation and Configuration 2-5