HP PageWriter XL M1705B Service Manual page 68

Leads For an Auto report (3x4, 3R and 3x4, 1R only), this
key selects the set of leads used for rhythm strips.
For a single rhythm strip (1R) you select any one
of the twelve leads; the default lead is I. For three
rhythm strips (3R), the lead sets available are:
w I, II, III
H aVR, aVL, aVF
w Vl, v2, v3
n
V4, V5, V6
n
Custom (Default = I,aVF,V2)
For a 3- or 6-lead Manual report, this key selects the
set of leads used (12-lead reports automatically use
all 12 leads). The selections for the S-lead set are the
same as for the 3R sets listed above. The selections
for 6-lead sets are:
w I, II, III, aVR, aVL, aVF
n
Vl, V2, V3, V4, V5, V6
w Custom (Default = II,aVF,Vl,V2,V4,VG)
Note
t?
:'
You can change power-on default leads in Global Configuration.
The lead selections listed above are for the Standard configuration. If
the cardiograph is configured for Cabrera leads, the lead selections
that appear will be different. Also, if pediatric, Frank, or research
leads are connected in place of standard leads, the cardiograph
detects their presence and alters the displayed lead sets accordingly.
Operation 3-5