The Selection Display (M1700A & M1701A Only); Selection Display Menu, Part 1; Selection Display Menu, Part 2 - HP PageWriter XL M1705B Service Manual

The Selection Display
The selection display is a two-part menu that allows you to
(M1700A & M1701A only)
select patient ID numbers of stored ECGs for operations such as
transmitting, editing, deleting, printing, and analyzing.
Selection Display Menu, Part 1
The first part is a display similar to the menu shown here.
123456 04-01-90 ii:25:5lAM
Select
Function
Next Previous More
Select Selects the patient ID number displayed in the
message line. An asterisk (*) appears before the
entry to indicate its selection. If the number is
already selected, pressing this key de-selects the
number. As you move through the list of stored
ECGs, you can select any number of ECGs (except
in the edit function, which allows only one selection).
Function
Starts the function for which you are selecting an
ECG. This key has one of the following function
names:
M Transmit (appears only on the M1700A)
n
Delete
w Analyze (appears only on the lv11700A)
H Edit (allows only a single ECG selection)
H Print
Next
Previous
More
Steps forward through the list of stored ECGs.
Steps backward through the list of stored ECGs.
Displays the second part of the selection display
menu, shown in the next section.
Selection Display Menu, Part 2
The second part of the selection display menu is similar to this one.
123456 04-01-90 11:25:5iAM
Function
All Find More
Function
All
Find
More
The function label appears in both menu parts for
convenience. You can initiate the function without
toggling to the other part of the menu.
Selects all stored ECGs. (Not available with Edit .)
Selects a specific ECG-you enter the number.
Switches to the first part of the menu.
Operation 3-15