Transmit (M1700A Only) - HP PageWriter XL M1705B Service Manual

Transmit (M1700A Only)
When you press Transmit the following menu is displayed:
Note ,I
b
Selected
Transmit
All NewCroup
Query
Exit
Selected
All
Presents the selection display (the selection display is
described at the end of this section). Allows you to
select one or more stored ECGs for transmission. If
AutoDial is enabled, the cardiograph automatically
dials and transmits the selected ECG(s) to the
chosen site when you press Transmit in the selection
display.
Transmits all the stored ECGs. If AutoDial is
enabled, the cardiograph dials and transmits
immediately. If AutoDial is not enabled, the
following display appears:
Choose Site
1
2
3 4 Manual
Selecting one of the numbers initiates transmitting
to the site assigned to that number. If you
select Manual, the display prompts you to enter
configuration information. Refer to Chapter 2 for
details about configuring autoclial sites.
NewGroup
Transnlits only those ECGs that have not previously
been transmitted.
Query
Calls a site to receive ECG information. Query
is used only with an ECG management system.
The PageWriter can receive ECGs from an ECG
rnanagernent systenl on request by using the Query
function. PageWriters with A.Ol.XX software can
only receive text information this way, and cannot
receive ECG traces.
The PageWriter provides two types of Query: standard and
interactive (interactive query is only available with A.02.XX and
higher software).
In standard query text reports (analysis only) are queued at the
system for output to the cardiograph. Only diagnostic and extended
measurement reports can be sent in standard query.
In interactive query, the cardiograph user selects the ECG to receive.
A single patient's ECG (report and waveform) can be retrieved from
the system this way by answering yes to the question Select an
on-line report.
Operation 3-11