Transmitting More Than One Ecg; Receiving Ecgs - HP PageWriter XL M1705B Service Manual

configured. Messages such as Calling site, Connected to site,
Transmitting . . . , and Transmitting 1 of 1 ECG(s) might
appear.
7. When the ECG has been successfully transmitted, the message 1
ECG(s) Transmitted appears.
8. Press Exit to continue.
Transmitting More than One ECG
To transmit several ECGs, follow the same steps as above, but
select all the ECGs you want to transmit. After selecting the
ECGs, press Transmit.
To transmit all stored ECGs, follow the same steps as above, but
press Transmit All instead of Transmit Selected.
To transmit all ECGs that have not been previously transmitted,
follow the same steps as above, but press Transmit NewGroup
instead of Transmit Selected.
Manual allows you to transmit to a site that has not been
configured.
Note .I
b
See
the
Page Writer XLi
User's
Reference Guide
for more information
about transmitting ECGs.
Receiving ECGs
The cardiograph can receive ECGs from a fax machine whenever
r\
it is turned on, configured for fax modem usage, and idle. If the
cardiograph is turned off, it cannot receive ECGs. All ECGs are
printed as they are received. You cannot edit or store received ECGs.
You can stop receiving the ECGs any time by pressing (Stop).
Note ,I
t?
The fax modem can also transmit ECGs to receivers other than
.
fax machines. When configured as a programmable modem, the
fax modem performs in the same manner as the M1706A Hayes@
modem.
C-4 M1756A Direct Digital ECG Fax