List Of Predefined Subprograms; Predefined Subprogram Calls - Siemens SINUMERIK 840DE Programming Manual

Tables

12.4 List of predefined subprograms

Group 59: Technology G groups
Name No. Meaning
DYNNORM 1. Standard dynamic, as previously
DYNPOS 2. Positioning mode, tapping
DYNROUGH 3. Roughing
DYNSEMIFIN 4. Finishing
DYNFINISH 5. Smooth-finishing
12.4 List of predefined subprograms
12.4.1

Predefined subprogram calls

List of predefined subprograms
The list of predefined subprograms contains all available subprograms grouped according to
function.
Some control functions are activated with subprogram call syntax.
1. Coordinate system
Vocabulary 1st parameter
word/
function
identifier
PRESETON AXIS*:
Axis identifier
Machine axis
DRFOF
*) As a general rule, geometry or special axis identifiers can also be used instead of the
machine axis identifier, as long as the reference is unambiguous.
12-44
2nd parameter 3rd-15th
parameter
REAL: 3rd-15th
Preset offset Parameter as
1 ...
G700/G7100
context
4th-16th Explanation
parameter
4th-16th Sets the actual value for programmed
parameter axes.
as 2 ... One axis identifier is programmed at a
time, with its respective value in the
next parameter.
Preset offsets can be programmed for
up to 8 axes with PRESETON.
Deletes the DRF offset for all axes
assigned to the channel.
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
X m/n SAG MM
m Def.
m
m
m
m
Fundamentals