Siemens SINUMERIK 840DE Programming Manual page 270

Feedrate Control and Spindle Motion
7.5 Milling on turned parts (TRANSMIT)
Programming
TRANSMIT or TRANSMIT(n)
Or
TRAFOOF
Parameters
TRANSMIT
TRANSMIT(n)
TRAFOOF
Note
An active TRANSMIT transformation is likewise deactivated if one of the other
transformations is activated in the relevant channel (e.g., TRACYL, TRAANG, TRAORI).
7-20
Activates the first declared TRANSMIT function
Activates the nth declared TRANSMIT function; n can be up
to 2 (TRANSMIT(1) is the same as TRANSMIT).
Deactivates an active transformation
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
Fundamentals