Siemens SINUMERIK 840DE Programming Manual page 437

Group 2: Non-modally valid motions, dwell time
Name No. Meaning
G4 1. Dwell time preset
G63 2. Tapping without synchronization
G74 3. Reference point approach with synchronization
G75 4. Fixed point approach
REPOSL 5. Repositioning linear: Linear repositioning
REPOSQ 6. Repositioning quadrant: Repositioning in a quadrant
REPOSH 7. Repositioning semicircle: Repositioning in semicircle
REPOSA 8. Repositioning linear all axis: Linear repositioning with all axes
REPOSQA 9. Repositioning quadrant all axes: Linear repositioning with all axes,
geometry axes in quadrant
REPOSHA 10. Repositioning semicircle all axes: Repositioning with all axes; geometry
axes in semicircle
G147 11. Soft approach with straight line
G247 12. Soft approach with quadrant
G347 13. Soft approach with semicircle
G148 14. Soft retraction with straight line
G248 15. Soft retraction with quadrant
G348 16. Soft retraction with semicircle
G05 17. Oblique plunge-cut grinding
G07 18. Compensatory motion during oblique plunge-cut grinding
Group 3: Programmable frame, working area limitation and pole programming
Name No. Meaning
TRANS 1. TRANSLATION: translation, programmable
ROT 2. ROTATION: rotation, programmable
SCALE 3. SCALE: scaling, programming
MIRROR 4. MIRROR: Mirroring, programmable
ATRANS 5. Additive TRANSLATION: additive translation, programming
AROT 6. Additive ROTATION: rotation, programmable
ASCALE 7. Additive SCALE: scaling, programming
AMIRROR 8. Additive MIRROR: Mirroring, programmable
9. Unassigned
G25 10. Minimum working area limitation/spindle speed limitation
G26 11. Maximum working area limitation/spindle speed limitation
G110 12. Pole programming relative to the last programmed setpoint position
G111 13. Polar programming relative to origin of current workpiece coordinate
system
G112 14. Pole programming relative to the last valid pole
G58 15. Programmable offset, absolute axial substitution
Fundamentals
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
12.3 List of G functions/preparatory functions
X m/n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X m/n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
X n
Tables
SAG MM
SAG MM
12-31