Siemens SINUMERIK 840DE Programming Manual page 413

FIFOCTRL Control of preprocessing buffer
FL Speed limit for synchronized axes
(feed limit)
FLIN Feed linear variable (feed linear)
6
FMA Feed multiple axial
FNORM Feed normal to DIN 66025
1,6
FP Fixed point: number of fixed points
to be approached
FPR Identification for rotary axis
FPRAOF Deactivate revolutional feedrate
FPRAON Activate revolutional feedrate
FRC Feed for radius and chamfer
FRCM Feed for radius and chamfer, modal
FTOCOF Online fine tool offset OFF
1,6
FTOCON Online fine tool offset ON
6
FXS Travel to fixed stop ON
FXST Torque limit for travel to fixed stop
(fixed stop torque)
FXSW Monitoring window for travel to fixed
stop
(fixed stop window)
G Functions
G G function (preparatory function)
The G functions are divided into G groups.
Only one G function from one group can be
written in one block.
A G function can either be modal (until
canceled by another function from the
same group), or non-modal (only effective
for the block it is written in).
Fundamentals
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
Real, w/o The unit set with
signs G93, G94, G95
is applicable
(max. rapid
traverse)
Acts on feed
with G93 and
G94
Real, w/o
signs
Integer,
w/o signs
0.001, ...,
999999.9
99
Integer, 1 = select,
w/o signs 0 = deselect
% parameter
optional
mm, inch parameter
or optional
degrees
Only integer,
predefined
values
12.1 List of statements
m
FL[axis] =... m
m
m
m
G75 FP=1 s
FPR (rotary axis)
s
m
m
m
m
m
G...
Tables
4
37
37
33
33
12-7