Siemens SINUMERIK 840DE Programming Manual page 95

Parameters
G54 to G57
G505 ...G599
G53
G500
SUPA
G153
For more information please refer to Frame section.
Offset of the zero in the Cartesian coordinate system by frames such as
• Programmable zero offset, e.g., TRANS, ATRANS
• Programmable rotations, e.g., ROT, AROT
• Programmable scalings, e.g., SCALE, ASCALE
• Programmable mirrorings, e.g., MIRROR, AMIRROR
Example
In this example, three workpieces, arranged on a pallet according to the zero offset values
G54 to G56, are machined successively. The machining sequence is programmed in
subprogram L47.
Fundamentals
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
3.6 Zero offset (frame), G54 to G57, G505 to G599, G53, G500/SUPA
Call the second to fifth settable zero offset/frame
Call the 6th to the 99th settable zero offset
Non-modal deactivation of current settable zero offset and
programmable zero offset
G500=zero frame, default setting,
(contains no offset, rotation, mirroring or scaling)
Deactivation of settable zero offsets/frames (G54 to G599)
until the next call.
Activation of the total basic frame ($P_ACTBFRAME).
G500 is not 0
Activation of first settable zero offset/frames
($P_UIFR[0]) and
Activation of total basic frame ($P_ACTBFRAME), or a
modified basic frame is activated.
Non-modal deactivation, including programmed offsets,
handwheel offsets (DRF), external zero offset and PRESET
offset.
Non-modal suppression of settable, programmable and total
basic frame
Positional Data
3-21