Siemens SINUMERIK 840DE Programming Manual page 511

Traversing path axes as positioning axes with
G0, 4-12
Traversing with feedforward control, 5-21
TRUE, 2-15
TURN, 4-37
Turning functions
Dimensioning for transverse axis, 3-15
Turning Functions
Chamfer, rounding, 4-73
V
V, 2-8
Variable identifier, 2-9
VELOLIMA, 5-18
W
W, 2-8
WAITMC, 7-9
WAITP, 7-9
WAITS, 7-14, 7-18
WALIMOF, 3-29
WALIMON, 3-29
Wear value, 8-69
Window width for fixed stop monitoring, 4-68
Words, 2-4
Working area limitation
Reference points on the tool, 3-30
working area limitation, 3-29
Working plane, G17 to G19, 3-25
Workpiece coordinate system, 1-17
Fundamentals
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
Workpiece coordinate system, 1-17
X
X, 2-5, 2-8, 3-3, 3-6, 3-13, 3-25, 3-26
X1, 3-32, 4-66
X2, 4-44
X3, 4-45
X4, 4-46
Y
Y, 2-5, 2-8, 3-3, 3-6, 3-13, 3-25, 3-26
Y1, 3-32, 4-66
Z
Z, 2-5, 2-8, 3-3, 3-6, 3-13, 3-25, 3-26
Z1, 4-45
Z2, 4-45
Z3, 4-45
Z4, 4-46
Zero frame, 3-21
Zero offset
Activating the zero offset, 3-23
Deactivating a zero offset, 3-24
G54 to G599, 3-19
Setting the offset values, 3-22
Zero points, 1-10
Index
Index-9