Siemens SINUMERIK 840DE Programming Manual page 445

OSC # 2. Continuous tool orientation smoothing
OSS # 3. Tool orientation smoothing at end of block
OSSE # 4. Tool orientation smoothing at start and end of block
Group 35: Punching and nibbling
Name No. Meaning
SPOF# 1. Stroke/punch OFF: Stroke OFF, nibbling, punching OFF
SON # 2. Stroke ON: Nibbling ON
PON # 3. Punch ON: Punching ON
SONS # 4. Stroke ON slow: Nibbling ON in IPO cycle
PONS # 5. Punch ON slow: Punching ON in IPO cycle
Group 36: Punching with delay
Name No. Meaning
PDELAYON 1. Punch with delay ON: Punching with delay ON
#
PDELAYOF 2. Punch with delay OFF: Punching with delay OFF
#
# The vocabulary word is not valid for SINUMERIK 810D/NCU571.
Group 37: Feed profile
Name No. Meaning
FNORM # 1. Feed normal: Feed normal (as per DIN 66025)
FLIN # 2. Feed linear: Feed linear variable
FCUB # 3. Feed cubic: Feedrate variable according to cubic spline
Group 38: Assignment of high-speed inputs/outputs for punching/nibbling
Name No. Meaning
SPIF1 # 1. Stroke/punch interface 1: fast NCK inputs/outputs for punching/nibbling
byte 1
SPIF2 # 2. Stroke/punch interface 2: fast NCK inputs/outputs for punching/nibbling
byte 2
Group 39: Programmable contour accuracy
Name No. Meaning
CPRECOF 1. Contour precision OFF: Programmable contour precision OFF
CPRECON 2. Contour precision ON: Programmable contour precision ON
#The vocabulary word is not valid for SINUMERIK NCU571.
Fundamentals
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
12.3 List of G functions/preparatory functions
X m/n
X m
X m
X m/n
X m/n
X m/n
X m/n
Tables
m
m
m
SAG MM
m Def.
m
m
SAG MM
m Def.
m
SAG MM
m Def.
m
m
SAG MM
m Def.
m
SAG MM
m Def.
m
12-39