Setting Up The Automatic Shutdown At The Time Of A Power Failure - Epson RC420 Manual

Setup & Operation 10. UPS (Uninterruptible Power Supply)

10.6.3 Setting up the Automatic Shutdown at the Time of a Power Failure

NOTE
The Controller has been configured so that the system is automatically shut down at the
time of a power failure. Normally, it is not necessary to configure the Controller
following the procedure described in this section. When the computer name, user name,
or password is changed, however, configure the Controller following the procedure
below.
(1) Open the Control Panel.
(2) Double-click the <Power Options> icon in the [Control Panel].
(3) Select the [UPS] tab.
98
When using EPSON RC+4.2 (Windows XP), select [Switch to Classic View].
Options Properties] dialog will appear.
The [Power
RC420 Rev.9