Recovering The Hdd - Epson RC420 Manual

12. Recovering the HDD

This chapter describes the procedure for recovering the current HDD in the RC420
Embedded OS installed in.
Follow the procedure below to recover the HDD.
1 Backing Up the Current Data Setting Maintenance 2.5 Backup of Data
2 Recovering Windows
3 Configuring Windows
4
5 Setting Up UPS
6 Restoring the Backup Data
Please prepare the parts below.
Recovery startup disk (FD) for RC420
EPSON RC+ setup CD-ROM
PS/2 keyboard
PS/2 mouse
USB keyboard and USB mouse cannot be used for Windows recovery. Be sure to use
NOTE
PS/2 keyboard and PS/2 mouse.
NOTE
Data for recovery incorporated in the HDD for the RC420 Embedded OS installed in may
not be recovered by the HDD condition. Replace the HDD when recovery is unable.
NOTE
HDD for RC420 that installs Windows XP does not support recovery. Contact us when
recovery is necessary.
RC420 Rev.9
Recovery Procedure
Setting Up EPSON RC+
Using the Network
Using the CD-R/RW Drive
with USB
Parts
Maintenance 12. Recovering the HDD
Reference
Maintenance 12.1 Recovering Windows
Maintenance 12.2 Configuring Windows
Maintenance 12.3 Setting Up EPSON RC+
Maintenance 12.4 Setting Up EPSON RC+
(Using the CD-R/RW Drive with USB)
Setup & Operation 10.6. Configuring Windows
Maintenance 2.5 Backup of Data
Note
Attachment to RC420
Only USB keyboard users
Only USB mouse users
(Using the Network)
143