Standard I/O Connector - Epson RC420 Manual

Setup & Operation 6. STANDARD I/O Connector

6. STANDARD I/O Connector

The STANDARD I/O connector is for connecting your input/output equipment to the
system. It has pins for 16 inputs and 16 outputs.
The STANDARD I/O corresponds to the input/output bit numbers 0-15.
Refer to the Setup & Operation 7. Expansion I/O Board - Optional for the specified
model of an expansion I/O Board.
For cable wiring, refer to the Setup & Operation 3.4 Noise Countermeasures in order to
prevent noise.
RC420 Rev.9 41