Epson RC420 Manual page 166

Maintenance 12. Recovering the HDD
(5) Select the [General] tab in the [Local Area Connection Properties] dialog and click
(6) Select the "Protocol" in the [Select Network Component Type] dialog and click the
(7) Select the "NetBEUI Protocol" in the [Select Network Protocol] dialog and click the
(8) The [Check if the "NetBEUI Protocol" is added in the [Local Area Connection]
156
the <Install> button.
<Add> button.
<OK> button.
dialog and click the <Close> button.
RC420 Rev.9