Wiring Table — Right Spray Valve - Toro Multi Pro 1750 Installation Instructions Manual

Wiring Table—Right Spray Valve
Wire color codes—DIN wire
harness
Brown
Blue
Yellow/green
2. Insert the wire of the DIN wire harness into the
butt-splice connector of the 3-pin adapter
1. 3-pin adapter
2. DIN wire harness
3. Center the crimping tool over the butt-splice connector
and wires and crimp the connector securely
1. 3-pin adapter
2. Wire harness branch (left
spray)
4. Repeat steps 2 and
5. Use a heat gun to shrink the insulating sleeves of the 3
butt-splice connectors
Wire color codes—3-pin
adapter
Pink
Black
White
(Figure
Figure 34
3. Butt-splice connector
4. Exposed wire 9.5 mm (3/8
inch)
(Figure
Figure 35
3. Connector (center spray)
4. Connector (right spray)
3 for the 2 remaining wires.
(Figure 36).
34).
35).
18
Figure 36