Wiring Table — Master-Spray Valve - Toro Multi Pro 1750 Installation Instructions Manual

1. Black wire (4-pin
adapter—rate valve)
2. Black wire (3-pin
adapter—agitation valve)
Wiring Table—Master-Spray Valve
Wire color Wire color
codes—DIN wire codes—4-pin
harnesses adapter for the
rate valve and
3-pin adapter for
the agitation valve
Brown Pink
(master-spray
valve)
Blue (master-spray Black
valve)
Yellow/green Not applicable
(master-spray
valve)
4. Insert the black wire of the 4-pin adapter for the rate
valve, black wire of the 3-pin adapter of the agitation
valve, and blue wires for the DIN wire harness into the
butt-splice connector on the black wire of the 3-pin
adapter for the master-spray valve.
5. Center the crimping tool over the butt-splice connector
and wires and crimp the connector securely.
6. Align the pink wire of the 4-pin adapter for the rate
valve and the pink wire of the 3-pin adapter of the
agitation valve, and the brown wire of the DIN wire
harness with the pink wire of the 3-pin adapter for
the master-spray valve; refer to the wire table for the
master-spray valve.
Figure 46
3. Blue wire (DIN wire
harness—master-spray
valve_
4. Black wire (3-pin
adapter—master-spray
valve)
Wire color
codes—3-pin
adapter
(master-spray
valve)
Pink
Black
White
7. Insert the pink wire of the 4-pin adapter for the rate
valve, pink wire of the 3-pin adapter of the agitation
valve, and brown wires for the DIN wire harness into
the butt-splice connector on the pink wire of the 3-pin
adapter for the master-spray valve.
1. Pink wire (4-pin
adapter—rate valve)
2. Pink wire (3-pin
adapter—agitation valve)
8. Center the crimping tool over the butt-splice connector
and wires and crimp the connector securely.
9. Use a heat gun to shrink the insulating sleeves of the
3 butt-splice connectors.
23
Figure 47
3. Brown wire (DIN wire
harness—master spray
valve_
4. Pink wire (3-pin
adapter—master spray
valve)