Toro Multi Pro 1750 Installation Instructions Manual page 45

Figure 96
1. Quick-connect fitting
(flange shutoff valve)
2. Retainer
3. Straight barbed fitting
3. Secure the straight barbed fitting and the quick-connect
fitting (Figure 96) with the retainer that you removed in
step 3 of Installing the Shutoff Valve for the Optional
Spray Gun Kit or the Electric Hose Reel Kit (page
4. Route the supply hose forward along the sprayer tank
toward the hose reel
5. Assemble the inlet hose through the support clamp at
the forward strap of the sprayer tank
Figure 97
1. Hose—1.3 x 180 cm (1/2
x 83 inches)
6. Assemble the supply hose onto the barbed fitting at the
inlet of the hose reel
with a hose clamp 13 to 32 mm (1/2 to 1-1/4 inches).
4. Hose—1.3 x 180 cm (1/2
x 83 inches)
5. Front of the machine
(Figure 96).
(Figure 97).
2. Support clamp
(Figure 98), and secure the hose
1. Barbed fitting (inlet swivel)
2. Hose clamp
42).
45
Figure 98
3. Supply hose (hose reel)