Toro Multi Pro 1750 Installation Instructions Manual page 42

Installing the Shutoff Valve for the
Optional Spray Gun Kit or the Electric
Hose Reel Kit
1. Remove the flange clamp that secures the gasket and
end cap to the flange of the right spray valve
87).
Figure 87
1. Gasket
2. End cap (ported)
3. Flange (right spray valve)
2. Remove the tube coupler from the port of the end cap
(Figure 87).
Note: Retain the flange clamp, gasket, and tube
coupler. You no longer need the end cap.
3. Remove the retainer that secures the straight barbed
fitting (3/4 inch) to the flange shutoff valve, and
remove the barbed fitting
Note: Retain the retainer and straight barbed fitting for
installation in Installing the Supply Hose—Machines
with the Optional Electric Hose-Reel Kit (page
(Figure
4. Flange clamp
5. Tube coupler
(Figure 88).
44).
1. 90° elbow (with pressure
port)
2. Tube coupler
3. Gasket—25 x 35 mm (1 x
1-3/8 inches)
4. Flange clamp—40 to
64 mm (1-9/16 to 2-1/2
inches)
4. Assemble the tube coupler that you removed in step
into the pressure port of the 90° elbow
5. Assemble the flanged shutoff valve to the 90° elbow
(with pressure port) and gasket—25 x 35 mm (1 x
1-3/8 inches) with the flange clamp—40 to 64 mm
(1-9/16 to 2-1/2 inches) as shown in
Note: Ensure that the handle of the shutoff valve and
the tube coupler are aligned 180° apart.
6. Assemble the flange of the 90° elbow (with pressure
port) to the flange of the right-boom section valve with
the gasket and flange clamp that you removed in step
1 as shown in Figure
42
Figure 88
5. Flanged shutoff valve
6. Straight barbed fitting (3/4
inch)
7. Retainer
(Figure
Figure
89.
2
88).
88.