Connecting The Communication Cabling For The Dual Cabinet Controller - ABB IRC5 Product Manual

2.5.7. Connecting the communication cabling for the Dual Cabinet Controller

General
Normally the communication cabling between the Control Module and Drive Module are
installed at delivery.
The following procedures describes exceptions from the standard delivery, when the cables
must be connected to the Control Module after delivery.
Communication cabling
The communication cabling are delivered with the Drive Module, and consists of the
following cables:
Location
xx0600003365
A
B
3HAC021313-001 Revision: P
2.5.7. Connecting the communication cabling for the Dual Cabinet Controller
•
Ethernet cable
•
Safety cable
Ethernet cable
Safety cable
2 Installation and Commissioning, IRC5
Continues on next page
63