Yamaha YSP10 Service Information page 110

Press the [Utilities] button of the application screen. The CalibSm screen for print
feedback adjustment reappears.
Press any gray cell of [Mask Mark] > dX / dY columns. The machine traces the
mask aperture of the selected coordinates and the results are shown numerically.
Repeat step 14 and 15 and select the line of No.14 in the upper table of the screen.
Then press the [Mark Adj.] button.
SI1906002E-001=YSP10 installation and adjustment procedures
110/120
For Service Engineers
Service Information