Check And Adjust The Board Transfer Positions (Y And Z) - Yamaha YSP10 Service Information

13.9. Check and adjust the board transfer positions (Y and Z)

Start the CalibSm utility.
Press the [201 Machine Position] button on the [Adjustment] tab.
Check that [Adjust Item] > "Carry Position" is selected.
Adjust the board transfer position Y

Select "PCB Carry PosY [Front]" by tapping its check box. Deselect all other
items.
SI1906002E-001=YSP10 installation and adjustment procedures
77/120
For Service Engineers
Service Information