Yamaha YSP10 Service Information page 95

Release the Emergency Stop button.
Press the [Move Adjust Pos.] button to move the camera axis to the mark position
located at the center of front conveyor.
Press the [Execute] button.
Check that the measured values are within acceptable ranges. Fill in the values in
the check sheet.
Acceptable ranges
Press the [Yes] button in the provided confirmation message box. The measured
data is saved and the scale adjustment is complete.
Item
Camera Angle
Scale X, Scale Y
SI1906002E-001=YSP10 installation and adjustment procedures
95/120
Service Information
Acceptable range
0 +/- 0.5 degree
10.58 +/- 0.3μm
For Service Engineers
Displayed after
executing the
adjustment.