Yamaha YSP10 Service Information page 68

Check the Reference values.
Note
Reference value for the W1/W3 axes and CV1-3 axes need not be checked.
In the below confirmation message box press the [Yes] button.
*The past logs can be seen by pressing [F2] key.
Adjust Item
Originize
Motor reference
Dual drive offset
All
Soft limit
Press [F2] key on this message.
Brake release
Close
The log saved date
Update
Save log
Append mode
Browser
Close
Press the [+] button at the
head of "References".
SI1906002E-001=YSP10 installation and adjustment procedures
68/120
Service Information
Check values in this column.
Acceptable range
50 +/- 5 ％
Saved logs
For Service Engineers
Update
Save log
Append mode
Browser
Close