Toro Greensmaster eFlex 1021 Service Manual page 107

Fuse Identification and Function (continued)
Testing the Fuse
Greensmaster ® eFlex 1021
20248SL Rev C
Fuse F1-4: This fuse block position is open.
1. Access the fuse block as described above.
2. Carefully remove the fuse from the fuse block for testing.
3. The fuse should have continuity between the fuse terminals.
The eFlex machine uses special fuses that are rated for 80 V. If the
fuse replacement is necessary, ensure to use the fuses as identified
in your eFlex Parts Catalog. Do not use regular automotive fuses in
your eFlex machine.
4. Carefully install the functional fuse into the fuse holder.
5. After you complete the fuse service, secure the battery cover to the machine
with the 4 bolts.
6. Connect the battery pack; refer to
Battery Pack (page
IMPORTANT
Disconnecting and Connecting the Lithium
5–3).
Page 5–23 Electrical System: Testing the Electrical Components