Service And Repairs; Reel Drive Belt - Toro Greensmaster eFlex 1021 Service Manual

Service and Repairs

Reel Drive Belt

g312311
1. Reel drive housing
2. Reel drive belt
3. Idler arm
Removing the Reel Drive Belt
Greensmaster ® eFlex 1021
20248SL Rev C
4. Carriage bolt
5. Bolt Gasket
6. Reel drive cover
The Greensmaster machines use a positive drive belt on the right side of the
machine to operate the cutting unit.
Note: Refer to Figure 14
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. Remove the 4 socket head screws (7) that secure the reel drive cover (6)
to the reel drive housing (1), and remove the cover to expose the reel drive
belt (2).
Figure 14
during this procedure.
FF
Disconnecting and Connecting the
5–3).
Page 4–5 Traction and Reel Drive Systems: Service and Repairs
7. Socket head screw (4 each)
position, park the
ISENGAGE
, and remove the key; refer to