Drum Drive Gear Box Assembly - Toro Greensmaster eFlex 1021 Service Manual

Drum Drive Gear Box Assembly

g335443
1. Transmission gear box assembly
2. Traction drum
3. Shoulder bolt (3 each)
4. RH hex shaft
5. Drum drive gear box assembly
Removing the Drum Drive Gear Box Assembly
Traction and Reel Drive Systems: Service and Repairs
6. Drive tube
7. Frame assembly
8. Shoulder bolt
9. Nut
10. Washer
Note: Refer to Figure 18
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. Remove the transport wheel if attached; refer to
Wheel (page 6–23).
Figure 18
11.
12.
13.
during this procedure.
FF
Disconnecting and Connecting the
5–3).
Page 4–12
Splined coupler
Truss screw
LH hex shaft
position, park the
ISENGAGE
, and remove the key; refer to
Removing the Transport
Greensmaster
20248SL Rev C
® eFlex 1021