Toro Greensmaster eFlex 1021 Service Manual page 69

Installing the Drum Drive Assembly
Greensmaster ® eFlex 1021
20248SL Rev C
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. Position the LH and RH drum drive gear box assembly (item 5 in
and traction drum (2) onto the frame assembly (7).
4. Secure the LH and RH drum drive gear box assembly (5) to the traction drum
(2); refer to Installing the Drum Drive Gear Box Assembly (page
5. Connect the battery pack; refer to
Battery Pack (page
FF
Disconnecting and Connecting the
5–3).
Disconnecting and Connecting the Lithium
5–3).
Page 4–21 Traction and Reel Drive Systems: Service and Repairs
position, park the
ISENGAGE
, and remove the key; refer to
Figure
4–17).
21)