General Information; Disengaging The Drum Drive From Transmission - Toro Greensmaster eFlex 1021 Service Manual

General Information

Disengaging The Drum Drive From Transmission

Traction and Reel Drive Systems: General Information
The Operator's Manual provides information regarding the operation, general
maintenance, and maintenance intervals for your machine. Refer to the
Operator's Manual for additional information when servicing the machine.
g335307
1. Transmission gear box assembly
The traction drum is driven by series of spur gears inside the transmission gear
box assembly. To disengage the traction drum drive from the transmission, do
the following procedure:
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. Locate the traction engage/disengage lever on top of the transmission gear
box assembly.
4. To disengage the drum drive, rotate the traction engage/disengage lever
to clockwise direction (away from the center of transmission gear box
assembly).
5. To engage the drum drive, rotate the traction engage/disengage lever to
anti-clockwise direction (towards the center of the transmission gear box
assembly).
6. Connect the battery pack; refer to
Battery Pack (page
Figure 11
2. Traction engage/disengage lever
FF
Disconnecting and Connecting the
5–3).
Disconnecting and Connecting the Lithium
5–3).
Page 4–2
position, park the
ISENGAGE
, and remove the key; refer to
Greensmaster
20248SL Rev C
® eFlex 1021