Toro Greensmaster eFlex 1021 Service Manual page 61

Removing the Drum Drive Gear Box Assembly (continued)
Greensmaster ® eFlex 1021
20248SL Rev C
Note: Support the machine on kickstand during this operation.
4. Move the traction engage/disengage lever to the disengage position to
remove torque from the drum drive gears.
5. Remove the shoulder bolt (8) that secures the RH drum drive gear box
assembly (5) to the frame assembly (7).
6. Remove the 3 shoulder bolts (3) that secures the RH drum drive gear box
assembly (5) to the traction drum (2). Remove the RH drum drive gear box
assembly from the frame assembly. Support the drum assembly.
7. If necessary, slide and remove the drive tube (6) from the transmission gear
box assembly (1).
8. If necessary, remove the RH hexagonal shaft (4) from the RH drum drive
gear box assembly (5).
9. Remove the truss screw (12), nut (9) and washer (11) that secures the 2
splined couplers (11) to the transmission gear box assembly (1) and LH
drum drive gear box assembly (5).
10. Remove the shoulder bolt (8) that secures the LH drum drive gear box
assembly (5) to the frame assembly (7).
11. Remove the 3 shoulder bolts (3) that secures the LH drum drive gear box
assembly (5) to the traction drum (2). Remove the LH drum drive gear box
assembly from the frame assembly. Support the drum assembly.
12. If necessary, remove the LH hexagonal shaft (13) from the LH drum drive
gear box assembly (5).
Page 4–13 Traction and Reel Drive Systems: Service and Repairs