Adjustments
Adjusting the Reel Cable
Greensmaster
®
eFlex 1021
20248SL Rev C
g336875
1.
Retaining ring
2.
Reel selector knob
g349621
1.
Rear jam nut
2.
Front jam nut
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. To remove slack from the reel cable, perform the following steps:
A. Move the reel selector knob to the high-reel-speed position; refer to
Figure
76.
B. Loosen the rear jam nut and tighten the front jam nut; refer to
4. Connect the battery pack; refer to
Battery Pack (page
Figure 76
3.
Jam nut
4.
Reel cable
Figure 77
3.
Reel cable
FF
Disconnecting and Connecting the
5–3).
Disconnecting and Connecting the Lithium
5–3).
Page 6–3
Controls, Wheels, and Accessories : Adjustments
position, park the
ISENGAGE
, and remove the key; refer to
Figure
77.