Dell PowerVault 124T DLT VS160 User Manual page 24

Remote Management Unit: Dell PowerVault 124T DLT VS160 Autoloader User's Guide
Back to Contents Page
Remote Management Unit: Dell™ PowerVault™ 124T DLT VS160
Autoloader User's Guide
Remote Management Unit Overview
Configuration Page
Firmware Page
Error Log and Diagnostics Page
Library Operations Page
Remote Management Unit Overview
Your Dell PowerVault 124T DLT VS160 autoloader includes an Ethernet interface that allows remote administration. The
interface, called the Remote Management Unit (RMU), includes a Web server that provides a Hypertext Markup Language
(HTML)-based graphic user interface (GUI) for ease of use.
The RMU performs many of the same functions as the front panel interface. These functions include moving tapes, system
operations options, networking options, security options, running diagnostic tests, and performing system updates.
NOTE: Only use the Diagnostics commands when the autoloader is known to be idle and unavailable to host
backup/restore applications. If a Diagnostic command is issued during a drive or autoloader operation, the unit will
respond that it is busy. However, if a Diagnostic command is issued and then a backup or restore job runs, that job
may fail.
NOTE: To log out of the system, you must close your browser.
Default Username and Password
The default username for the Remote Management Unit is admin. The default password is password.
The username and password are case sensitive and should be entered in all lower case letters. The default username and
password are valid if no usernames have been configured.
Opening the Remote Management Unit
The Remote Management Unit has an HTML interface, which means you use a browser to open it. The following Web browsers
are supported:
For Microsoft® Windows® — Microsoft Internet Explorer 5.5 or later
For Microsoft Windows 2003 — Microsoft Internet Explorer 6.0 or later (with latest security patches)
For Redhat® 2.1 — Mozilla™ 1.4.2
Firefox™ 1.0
If security is enabled, you need an operator password to access the Library Operations page, and you need an administrator
password to access the Configuration, Error Logs and Diagnostics, and Firmware pages.
When using the RMU with Microsoft Internet Explorer, be sure to enable the Allow META REFRESH option. On version 6.0 of
Internet Explorer, this feature is controlled through the Tools>Internet Options menu selection, under the Security tab.
Use of all Remote Management Unit web pages features requires Java Script to be enabled in the user's web browser.
To open the Remote Management Unit:
1. From your computer, open your Web browser.
file:///T|/htdocs/stor-sys/124T/en/124tvs16/rmu.html[12/5/2012 10:26:00 AM]