Dell PowerVault 124T DLT VS160 User Manual page 50

Troubleshooting: Dell PowerVault 124T DLT VS160 Autoloader User's Guide
Autoloader Operating System Failure Types
01 Resource Deleted
02 Pool Error
03 Pointer Error
04 Wait Error
05 Size Error
06 Group Error
07 No Event Timeout
08 Option Error
09 Queue Error
0A Queue Empty
0B Queue Full
0C Semaphore Error
0D Semaphore Timeout
0E Thread Error
0F Priority Error
10 Start Error
11 Delete Error
12 Resume Error
13 Caller Error
14 Suspend Error
15 Timer Error
16 Tick Error
17 Activate Error
18 Threshold Error
19 Suspend Lifted
1A Block Pool Error
1B Queue Function Failed
1C Semaphore Function Failed
1D Timer Function Failed
1F Thread Function Failed
20 Command Started
21 System Failure
22 System Busy
23 System Timeout
24 Software Error
25 Hardware Error
file:///T|/htdocs/stor-sys/124T/en/124tvs16/trouble.htm[12/5/2012 10:26:08 AM]
Errors 01-25 indicate that an unexpected event has occurred within the
autoloader internal operating system. The autoloader internal operating system is
called ThreadX, and some error messages may be preceded by a 'TX' notation.
For any of these events:
Power cycle the autoloader.
Run the Random Moves test from either the Remote Management Unit
(RMU) or the Operator Control Panel (OCP).
Note: The Random Moves test requires a minimum of two cartridges
present within the autoloader.
Check support.dell.com
If all previous steps fail, contact support.dell.com.
for PowerVault 124T firmware updates.