Dell PowerVault 124T DLT VS160 User Manual page 7

Installing the Autoloader: Dell PowerVault 124T DLT VS160 Autoloader User's Guide
Unpacking the Autoloader
Before you begin, clear a desk or table so that you can unpack the autoloader. You also need to select an open 2U computer
rack location near the server that will host the autoloader.
NOTICE: If the room in which you are working differs from the temperature in which the autoloader was shipped or
stored by 15°C (30°F) or more, let the autoloader acclimate to the surrounding environment for at least 12 hours before
opening the shipping carton.
Unpack and inspect the autoloader for shipping damage by doing the following:
1. Clear a table or desk so that you have room to unpack the autoloader.
2. Inspect the shipping box for damage. If you notice any damage, report it to the shipping company immediately.
3. Open the shipping box and remove the accessories package. Set the accessories package aside for now.
4. Lift the autoloader and padding out of the box and place it on the work surface, top facing up. Do not set the
autoloader on either end or sides.
5. Carefully remove the shipping padding from the front and back of the autoloader. Then remove the bag from the
autoloader. Save the packing materials in case you need to move or ship the autoloader in the future. Illustrations on
the box flaps indicate the proper placement of the packaging materials.
Identifying Product Components
Accessories
1 SCSI cable
2 SCSI terminator
3 Power cable
4 Getting Started Guide
5 CD (drivers and documentation)
6 Magazine blank
7 Bar code labels
8 TORX L-key drivers (T8 and T10)
file:///T|/htdocs/stor-sys/124T/en/124tvs16/install.html[12/5/2012 10:25:55 AM]