Dell PowerVault 124T DLT VS160 User Manual page 65

Troubleshooting: Dell PowerVault 124T DLT VS160 Autoloader User's Guide
Tape Directory
Corrupted On Load
TapeAlert Log Entry:
0000400000000000
Drive TAflag[19]
Nearing Media Life
TapeAlert Log Entry:
0000200000000000
Drive TAflag[20]
Clean Now
TapeAlert Log Entry:
0000100000000000
Drive TAflag[21]
Clean Periodic
TapeAlert Log Entry:
0000080000000000
Drive TAflag[22]
Expired Cleaning
Media
TapeAlert Log Entry:
0000040000000000
Drive TAflag[23]
Invalid Cleaning
Tape
TapeAlert Log Entry:
0000020000000000
Drive TAflag[24]
Retension Requested
TapeAlert Log Entry:
0000010000000000
file:///T|/htdocs/stor-sys/124T/en/124tvs16/trouble.htm[12/5/2012 10:26:08 AM]
search performance will be degraded.
The tape directory can be rebuilt by
reading all the data on the cartridge.
The tape cartridge is nearing the end
of its calculated Media may have life.
The tape drive needs cleaning.
The tape drive is due for routine
cleaning.
The last cleaning cartridge used in
the tape drive has worn out.
The last cleaning cartridge used in
the tape drive was an invalid type.
The tape drive has requested a
retension operation.
or permanent error
prevented the tape
directory from being
updated.
Media may have
exceeded its specified
number of passes.
The drive has responded
as if it has a head clog or
needs cleaning.
The drive is ready for a
periodic cleaning.
The cleaning tape has
expired.
Invalid cleaning tape
type used.
The drive is having
severe trouble reading or
writing that will be
resolved by a retension
cycle.
tape.
If error persists, discard
tape.
Use another tape cartridge
for your next backup.
Store this tape cartridge in
a safe place in case you
need to restore data from
it.
If the operation has
stopped, eject the tape and
clean the drive.
If the operation has not
stopped, wait for it to finish
and then clean the drive.
Check the tape drive user's
manual for device specific
cleaning instructions.
Wait for the current
operation to finish.
Then use a cleaning
cartridge. Check the tape
drive user's manual for
device specific cleaning
instructions.
Discard the worn out
cleaning cartridge.
Wait for the current
operation to finish.
Then use a new cleaning
cartridge.
Do not use this cleaning
cartridge in this drive.
Wait for the current
operation to finish.
Then use a valid cleaning
cartridge.
Perform a retension
operation.
Retry operation.