Dell PowerVault 124T DLT VS160 User Manual page 8

Installing the Autoloader: Dell PowerVault 124T DLT VS160 Autoloader User's Guide
9 Emergency Magazine Removal Tool
Connecting the SCSI and Power Cables
To connect the SCSI and power cables to the autoloader, follow these steps:
1. Shut down and turn off the selected server. Turn off all attached accessory devices, such as printers and other SCSI
devices.
2. Attach one end of the SCSI cable (included in the accessory kit) to one of the connectors on the back panel of the
autoloader.
3. Attach the other end of the SCSI cable to the connector on the SCSI host adapter or to the connector on the previous
device on the SCSI bus.
If the supplied SCSI cable does not fit the connector on your SCSI host adapter, you either have an incompatible SCSI
host adapter or you need to purchase a cable adapter. Contact your service representative or your SCSI host adapter
manufacturer for information.
1 Ethernet cable
2 SCSI cable
3 SCSI terminator
4. Attach the terminator to the remaining SCSI connector on the back panel of the autoloader (if the autoloader is the last
or only device on the SCSI bus). Otherwise, attach the cable to the next device on the SCSI bus. Make sure that the
last device on the SCSI bus is properly terminated.
5. Attach the female connector of the power cable to the power connector on the back panel of the autoloader.
6. Plug in the power cable to the nearest properly grounded power outlet.
7. Plug in the host server or workstation and all attached devices.
8. Turn on the autoloader by setting the power switch on the back panel to the ON position. Turn on any other devices you
turned off earlier. Check the LCD screen to make sure the autoloader is receiving power. If it is not, check the power
connections and your power source.
During the Power-on Self-Test (POST), both LEDs are illuminated briefly, followed by only the Ready/Activity LED
flashing. When the initialization sequence is complete, the LCD screen displays the Home screen.
9. Turn on the server.
file:///T|/htdocs/stor-sys/124T/en/124tvs16/install.html[12/5/2012 10:25:55 AM]