Figure 5-44 Fccs - Ccis Coexisting Network - NEC NEAX 2400 IPX Manual

The example data setting is shown using
assigned between FPC2 (PC2) and PC3 nodes.
FPC 1
PC 1
NCN
ffice Identification Code=76
The following data setting must be assigned at FPC1 (PC1) node in the example.
STEP 1: ASYD
Assign the OPC (Originating Point Code) within the range 1-16383.
Index 180, 181:
Ex.) OPC=16
Miscellaneous Data
Index 186:
b6 must be assigned as "1 (CCIS is in service)." The remaining data should be determined depending
on the customer's requirements.
STEP 2: ANPDL/ANPDN
Assign the first digit and NND (Number of Necessary digit) of the LCR access code.
1st DC=7
STEP 3: ASPAL/ASPAN
Assign the dummy route number to the LCR access code.
ACC=75
Figure
FPC 2
PC 2
LGRT=1
CCH=00020
ACC=75
LN

Figure 5-44 FCCS - CCIS Coexisting Network

b5
0 0 0 0 0 0
Index 181
CI=N (Normal)/H (Hooking)NND=2
SRV=LCRLGRT=Dummy route number
NDA-24299
Assignment of FCH Related Data
5-44, on condition that CCIS link data has already been
FCCS: Fusion Call Control Signal
CCIS: Common Cannel Interoffice Signal
b0 b7
0 0 0 1 0 0 0 0
Index 180
DATA PROGRAMMING
PC 3
STN: 2000
Office Identification Code=75
b0
CHAPTER 5
Page 101
Revision 1.0