Figure 5-17 Aspan Sample Data Sheet; Figure 5-18 Aspan Command Display - NEC NEAX 2400 IPX Manual

DATA PROGRAMMING
Assignment of Numbering Data for Telephone Numbers
STEP 3: ASPAN
Assign special access code data for the telephone numbers using the ASPAN command. SRV=TELN
is the data for telephone numbers.
command display for ASPAN.
- ASPAN Data Sheet (example)
- NCN (Node A)
TN = 1
TN = 1
ASPAN (Assignment of Special Access Code Data for Network Data Memory)
TN
1
SRV
TELN
Available SRV is telephone number only. For more information, see the "Office Data Specification".
Note:
The Numbering Plan data for the LDM and/or NDM cannot use separate Tenant Numbers (TN), so be sure
Note:
to assign the following data on the ASYDL command.
• ASYDL command, SYS1, INDEX 800
b1 = 1 (ASPAL command tenant data table development on LDM = Common)
b2 = 1 (ANPDL command tenant data table development on LDM = Common)
CHAPTER 5
Page 72
Revision 1.0
ACC = 4 CI = N (Normal)
ACC = 4 CI = H (Hooking)

Figure 5-17 ASPAN Sample Data Sheet

CI
1st DC
N
4
NND
6

Figure 5-18 ASPAN Command Display

Figure 5-17 and Figure 5-18
SRV (Kind of Service)
TELN: Telephone Number
SRV = TELN NND = 6
SRV = TELN NND = 6
NDA-24299
show a sample data sheet and
Telephone Number
4 x x x x x
6 digits
ACC (Access Code): max 6 digits
CI (Connection Index)
N: Normal
H: Hooking
B: Busy
Note
SRV (Kind of Service)
TELN: Telephone Number
NND (Maximum Number of Digits):
1 - 16 (digits)